WHY SHOULD I USE THIS SEAL STRIPS?
【 Noiseproof 】The voice is steady and heavy when switch the car door, eliminate collide sound when closed the car door.
【 Windproof 】 Inhibition of high-speed wind dry, reduce interior noise, can be controlled 120M/H into 80M/H.
【 Dustproof】Improve vehicle's air-tightness and dust-proof capabilities.
【 High and low-temperature resistant】The optimization engine compartment cooling airflow. Improve the air conditioning cooling and heating power, to some extent reduce fuel consumption.
【Safe】Non-toxic and no risk of air circulation in the car.
The best in the market.This new generation B type car seal strip upgraded product to replace D, P, Z and O type car seal strip. With one strip, you could do all.
1.Wipe away stains, dust, and oil at the installation site with a dry cloth
2.Peel the protective film at one end of the seal strip.
3. After placement, press seal firmly.
4. Do not wet wash for 3 days, within 24 hours try not to open the door repeatedly
5. After installation is complete, the door will be a bit tight, will return to normal in about 2-3 days.
It will seal the gap between car door, car body, car hood, bed rail etc. You can use them on the engine cover, trunk box, and doors.
- For engine cover: 16ft/5m long rubber strip
- For 4 car doors: 52ft/16m long rubber strip
- For 4 car doors and engine cover: 68ft/21m long rubber strip
- For 4 car doors engine hood and trunk box: 84ft/26m long rubber strip
Extreme temperatures will result in poor adhesive performance. Apply this seal only if the air and surface temperature is between 55°- 104°F(13° - 40°C). If 45°-54°F(7° - 12°C) you can use a hair dryer and warm the tape and surface of pickup 6in (15cm)section at a time, then apply.